Engineering, 15.11.2019 03:31 milan44

Based on laboratory testing the settling velocity of alum floc is 0.0014 ft/sec in water at 10c. convert the settling velocity to units of overflow rate in gallonsper day per square foot. what is the retention time in quiescent water in hours for alum floc to settle from the surface of the water to a depth of 10ft ?

what size pipe should be used to supply 82 l/s so that the velocity does not exceed 1 m/s assuming a c =100 ?

the alkalinity of a water sample consists of 12 mg/l of (co3 - ) and 100 mg/l of (hco3 calcculate the alkalinity in milligrams per liters as caco3.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

You know the right answer?

Based on laboratory testing the settling velocity of alum floc is 0.0014 ft/sec in water at 10c. con...