subject
Engineering, 14.11.2019 20:31 loveuncondition

Water is the working fluid in an ideal regenerative rankine cycle with one closed feedwater heater. superheated vapor enters the turbine at 10 mpa, 480 c and the condenser pressure is 6 kpa. steam expands through the first stage turbine where some is extracted and diverted to a closed feedwater heater at 0.7 mpa. condensate drains from the feedwater heater as saturated liquid at 0.7 mpa and is trapped into the condenser. the feedwater leaves the heater at 10 mpa and a temperature equal to the saturation temperature at 0.7 mpa.

for the cycle of problem 8.49, reconsider the analysis assuming the pump and each turbine stage have isentropic efficiencies of 80%.

determine:

a) the rate of heat transfer to the working fluid passing through the steam generator in kj per kg of steam entering the first stage turbine.

b) the thermal efficiency

c) the rate of heat transfer from the working fluid passing through the condenser to the cooling water in kj per kg of steam entering the first stage turbine.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
image
Engineering, 04.07.2019 18:10, Fahaddie
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
image
Engineering, 04.07.2019 19:10, moneyyfletcher
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
image
Engineering, 06.07.2019 03:20, carrietaylor234
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
You know the right answer?
Water is the working fluid in an ideal regenerative rankine cycle with one closed feedwater heater....

Questions in other subjects:

Konu
World Languages, 13.09.2021 14:00