Engineering, 13.11.2019 18:31 isaiahromero15

Where the normalized parameters are: • j = 10: spacecraft inertia, n·m·sec2 /rad • θr: reference satellite attitude, rad • θ: actual satellite attitude, rad • hy = 1: sensor scale factor, v/rad • hr = 1: reference sensor scale factor, v/rad • w: disturbance torque, n·m (a) use proportional (p) control and give the range of gain values for which the system is stable.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:20, annette211pdd8v9

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

continue

Engineering, 04.07.2019 19:10, ultimateapes

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

Answers: 2

continue

Engineering, 04.07.2019 19:10, rhiannpelham60

The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false

Answers: 2

continue

You know the right answer?

Where the normalized parameters are: • j = 10: spacecraft inertia, n·m·sec2 /rad • θr: reference...