Engineering, 12.11.2019 23:31 blahhhhhhh10

Asteam power plant is using an ideal regenerative rankine cycle. steamenters the high-pressure turbine at 11,000 kpa and 773.15 k, and the condenser operates at 10 kpa. the steam is extracted from the turbine at 475 kpa to heat the water in an open heater. the water is a saturated liquid afterpassing through the water heater. heat is transferred to the steam in the boiler at a rate of 425mw. determine

a) the mass flow rate of steam through the boiler

b) the net power output of the plant

c) the thermal efficiency of the cycle

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

Engineering, 04.07.2019 19:10, santosbeti90

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

continue

You know the right answer?

Asteam power plant is using an ideal regenerative rankine cycle. steamenters the high-pressure turbi...