Engineering, 12.11.2019 06:31 sadsociety41

Flue gas is cooled from 1373.15 k to 400 k and the heat is used to generate saturated steam at 100 °c in a boiler. the flue gas heat capacity is given by: cp /r = 3.83 + 0.000551t. water enters the boiler at 100 °c and is vaporized at this temperature, 100 °c. (its latent heat of vaporization is 2256.9 kj/kg).

a. with reference to the surrounding temperature of 15 °c, what is the lost work in units of kj/mol flue gas?

b. with reference to the surrounding temperature of 15 °c, what is the maximum work in kj/mol flue gas that can be accomplished by the saturated steam at 100 °c if it condenses only and does not subcool?

c. what is the maximum work theoretically obtainable from the flue gas itself as it cools from 1373.15 k to 4000 k? (the surrounding temperature at 15 °c)

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lillygrl100

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

continue

Engineering, 04.07.2019 18:20, CelesteN64

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

You know the right answer?

Flue gas is cooled from 1373.15 k to 400 k and the heat is used to generate saturated steam at 100 °...