Engineering, 08.11.2019 22:31 Itsyourgirllulu

In this lab you will write a backtracking algorithm to solve a simple puzzle that is similar to sudoku. in "simpledoku" you have to fill an empty square grid of n x n cells, with each cell getting one of the digits 1 through n. a number may not be repeated in any row, in any column, in the long top-left-to-bottom-right diagonal, or in the long top-right-to-bottom-left diagonal. try it on paper first. you’ll find that the 4x4 puzzle is very easy, but things get harder as the grid gets bigger. many students report the 6x6 is harder than they expected, but 7x7 is easier than 6x6.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 19:10, jrcspiderman2003

Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?

Answers: 3

continue

You know the right answer?

In this lab you will write a backtracking algorithm to solve a simple puzzle that is similar to sudo...