Engineering, 08.11.2019 01:31 janeou17xn

Turbine blades mounted to a rotating disc in a gas turbine engine are exposed to a gas stream that is at tinfinity=1200 deg. c and maintains a convection coefficient of h=250w/m2k over the blade. the blades, which are fabricated from inconel, k=6*10-4 m2 and a perimeter of p=110mm. a proposed blade-cooling scheme, which involves routing air through the supporting disc, is able ot maintain the base of each blade at a temperature of tb=300 deg. c.

a. if the maximum allowable blade temperature is 1050 deg. c and the blade tip may be assumed to be adiabatic, is the proposed cooling scheme satisfactory?

b. for the proposed heating scheme, what is the rate at which heat is transferred from each blade to the coolant?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, meganwintergirl

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 04.07.2019 19:10, babas97

What is a monomer? how do they form a ploymer from the view point of chemical bonding?

Answers: 1

continue

You know the right answer?

Turbine blades mounted to a rotating disc in a gas turbine engine are exposed to a gas stream that i...