Engineering, 07.11.2019 23:31 mathhelppls14

Haynes-shockley experiment is used to calculate the hole life time (tau)τp in an n-type sample. assume that the peak voltage of the pulse displayed on the oscilloscope screen is proportional to the hole concentration under the collector terminal at time td and that the displayed pulse can be approximated as a gaussian distribution which decays due to recombination by exp(-t/τp ) . the electric field is varied and the following data are taken: for td = 200 μs, the peak is 20 mv; for td = 50 μs, the peak is 80 mv. determine tp based upon the above measurement results.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:20, myahlit84

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:20, rjone8429

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

continue

Engineering, 06.07.2019 03:20, shelbellingswo

Aload of 10kn is to be suddenly applied to the free end of a vertical rod of length 500 mm, the upper end being rigidly fixed. 190 mechanical science what should the diameter of the rod be if the maximum stress in the rod is not to exceed 100 mpa? the tensile modulus of the rod is 205 gpa.

Answers: 2

continue

You know the right answer?

Haynes-shockley experiment is used to calculate the hole life time (tau)τp in an n-type sample. assu...