Engineering, 07.11.2019 03:31 kalithekittenqueen
Astructural component is fabricated from an alloy that has a plane strain fracture toughness of 45 mpa √ m . it has been determined that this component fails at a stress of 300 mpa when the maximum length of a surface crack is 0.95 mm. what is the maximum allowable surface crack length (in mm) without fracture for this same component exposed to a stress of 300 mpa and made from another alloy with a plane strain fracture toughness of 57.5 mpa √ m
Answers: 2
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10, salazjlove
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 19:10, 592400014353
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
Engineering, 06.07.2019 02:30, heavenwagner
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
Astructural component is fabricated from an alloy that has a plane strain fracture toughness of 45 m...
English, 30.04.2021 21:30
English, 30.04.2021 21:30
Mathematics, 30.04.2021 21:30