Engineering, 07.11.2019 02:31 Roquelle6301

Create a class named coordclass has 3 private data itemsint xcoord; int ycoord; int zcoord; write the setters and getters. they should be inline functionsvoid setxcoord(int) void setycoord(int) void setzcoord(int)int getxcoord() int getycoord() int getzcoord()write a member function named void display() that displays the data items in the following formatblank linexcoord is is is lineexampleblank linexcoord is 101ycoord is -234zcoord is 10blank line

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:10, 0436500

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

continue

You know the right answer?

Create a class named coordclass has 3 private data itemsint xcoord; int ycoord; int zcoord; write th...