Engineering, 06.11.2019 23:31 kakesheco4210

Apiston-based compressor is being designed to take atmospheric gas on mars and increase the pressure to 2.20 bar before the co2 it contains is processed for rocket fuel. the martian atmosphere consists mainly of carbon dioxide (i. e., greater than 95% mole fraction), with an average pressure at the surface of 700 pa and an average temperature of−53◦ c. assuming the martian atmosphere contains only co2, and the compression process is reversible and adiabatic, determine the following.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, sarahgrindstaff123

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

continue

Engineering, 04.07.2019 18:10, genyjoannerubiera

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

continue

You know the right answer?

Apiston-based compressor is being designed to take atmospheric gas on mars and increase the pressure...