subject
Engineering, 05.11.2019 04:31 pumaben2864

Aturbofan operates at 38,000 ft at mach 0.8. the compressor pressure ratio is 22.0 and the fan pressure ratio is 1.8. the fuel has a heating value of 17,900 btu/lbm and the exit total temperature from the burner is 2480°r. the core airflow is 155 lbm/sec and the bypass ratio is 5.50. the aerodynamic efficiencies of the compressor, fan, turbine, shaft, burner, primary nozzle and fan nozzle are 88%, 87%, 91%, 99.5, 92%, 95% and 95% respectively. the total pressure ratio (recovery factor) for the diffuser is 0.93. assume the total pressure ratio for the combustor is 0.97. the nozzles are both converging but might not be choked. find the developed thrust and tsfc. rerun this problem with a specific heat ratio of 1.4 and work the problem out by hand to compare with your code results.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
image
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
image
Engineering, 04.07.2019 18:20, DroctorWellsfan
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
You know the right answer?
Aturbofan operates at 38,000 ft at mach 0.8. the compressor pressure ratio is 22.0 and the fan press...

Questions in other subjects: