Engineering, 02.11.2019 06:31 kody2lewiskl

Alarge, flat plate is subjected to constant-amplitude uniaxial cyclic tensile and compressive stresses of 120 and 35 mpa, respectively. if before testing the largest surface crack is 1.00 mm and the plain-strain fracture toughness of the plate is 35 mpa √ __ m , estimate the fatigue life of the plate in cycles to failure. for the plate, m = 3.5 and a = 5.0 × 10−12 in mpa and m units. assume y = 1.3.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:20, krojas015

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

continue

Engineering, 04.07.2019 18:20, karatsgrande3772

Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t

Answers: 3

continue

Engineering, 04.07.2019 19:20, ijohnh14

Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers

Answers: 3

continue

You know the right answer?

Alarge, flat plate is subjected to constant-amplitude uniaxial cyclic tensile and compressive stress...