Engineering, 01.11.2019 04:31 joedawg50

Asheet of steel 2.5 mm thick has nitrogen atmosphere on both sides at 900 oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 1.2 x 10-10 m2/s, and the diffusion flux is found to be 1.0 x 10-7kg/m2-s. also, it is known that the concentration of nitrogen in the steel at the high pressure surface is 2 kg/m3. how far into the sheet from this high pressure side will the concentration be 0.5 kg/m3? assume a linear concentration profile

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 23:20, abbz13

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

continue

Engineering, 04.07.2019 18:10, Larkinlover703

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

continue

Engineering, 04.07.2019 18:10, samanthabutryn

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

You know the right answer?

Asheet of steel 2.5 mm thick has nitrogen atmosphere on both sides at 900 oc and is permitted to ach...