Engineering, 01.11.2019 04:31 Muffinaubrey
He weather channel reports that it is a hot, muggy day with an air temperature of , a 10 mph breeze out of the southwest, and bright sunshine with a solar insolation of 400 w/m2. consider the wall of a metal building over which the prevailing wind blows. the length of the wall in the wind direction is 10 m, and the emissivity is 0.93. assume that all the solar irradiation is absorbed, that irradiation from the sky is negligible, and that flow is fully turbulent over the wall. estimate the average wall temperature.
Answers: 1
![-12.4W/m^2*10m[T_s-(32.2+273)]K+[1*400W/m^2-0.93*5.67*10^{-8}W/m^2.K^4T_s^4]*10m=0](/tpl/images/0355/2623/a1c2c.png)
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
He weather channel reports that it is a hot, muggy day with an air temperature of , a 10 mph breeze...
Questions in other subjects:
