Engineering, 01.11.2019 04:31 reycaden
Two tanks (tank a and tank b) are separated by a partition. initially tank a contains 2 kg steam at 1 mpa and 300 c while tank b contains 3 kg saturated liquid-vapor mixture at 150 c with a vapor mass fraction of 50 percent. the partition is now removed and the two sides are allowed to mix until the mechanical and thermal equilibrium are established. if the pressure at the final state is 300 kpa, determine (a) the temperature and quality of the steam (if mixture) at the final state and (b) the amount of heat lost from the tanks.
Answers: 3
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 19:20, rosemary909
In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.
Answers: 3
Engineering, 06.07.2019 03:20, mpete1234567890
Asimply supported beam abc of length l has ab of length hl and second moment of area / and bc of length hl and second moment of area i2. determine the strain energy stored in the beam when it is subject to a vertical load f at its midpoint and the consequential central deflection.
Answers: 2
You know the right answer?
Two tanks (tank a and tank b) are separated by a partition. initially tank a contains 2 kg steam at...
Questions in other subjects:
Biology, 20.04.2021 20:50
Mathematics, 20.04.2021 20:50
Social Studies, 20.04.2021 20:50
History, 20.04.2021 20:50
