Engineering, 31.10.2019 06:31 reetajmahfouz3816

In a manufacturing facility, 2-in-diameter brass balls (k = 64.1 btu/h· ft·°f, rho = 532 lbm/ft3 , and cp = 0.092 btu/lbm·°f) initially at 250°f are quenched in a water bath at 120°f for a period of 2 min at a rate of 120 balls per minute . if the convection heat transfer coefficient is 42 btu/h·ft2 ·f, determine
(a) the temperature of the balls after quenching and (b) the rate at which heat needs to be removed from the water in order to keep its temperature constant at 120°f.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, meganwintergirl

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 19:20, sashajayne8260

Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.

Answers: 3

continue

You know the right answer?

In a manufacturing facility, 2-in-diameter brass balls (k = 64.1 btu/h· ft·°f, rho = 532 lbm/ft3 , a...