Engineering, 31.10.2019 04:31 bqg464

The faces of the thin square plate with side a = 24 are perfectly insulated.

(a) the upper side is kept at 25c and the other sides are kept at 0c. find the steady-state temperature u(x; y) in the plate.

(b) find the steady-state temperature in the plate speci ed in (a) if the lower side is kept at u 0c, the upper side at u 1c, and the other sides are kept at 0c. hint: split into two problems in which the boundary temperature is 0c on three sides for each problem. one more hint: the solutions to the two problems are so similar that you only need to solve at most one problem.

(c) find the steady-state temperature in the plate speci ed in (a) with the upper and lower sides perfectly insulated (i. e. ty = 0), the left side kept at 0c, and the right side kept at f(y)c.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, michellerosas

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

continue

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, oshawn108

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k

Answers: 2

continue

You know the right answer?

The faces of the thin square plate with side a = 24 are perfectly insulated.

(a) the up...