Engineering, 31.10.2019 00:31 mya1318

Two ball bearings from different manufacturers are being considered for a certain application. bearing a has a catalog rating of 2.0 kn based on a catalog rating system of 3 000 hours at 602 mechanical engineering design 500 rev/min. bearing b has a catalog rating of 7.0 kn based on a catalog that rates at 10 6 cycles. for a given application, determine which bearing can carry the larger load.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:20, luisgonz5050

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

Engineering, 04.07.2019 19:20, ijohnh14

Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers

Answers: 3

continue

You know the right answer?

Two ball bearings from different manufacturers are being considered for a certain application. beari...