Engineering, 29.10.2019 21:31 mtiger
Helium and nitrogen gas are contained in a conduit 5 mm in diameter and 0.1 m long at 298 k with a uniform constant pressure of 1.0 atm. the partial pressure of he at one end of the tube is 0.06 atm and at the other end it is 0.02 atm. the diffusivity of he in n2 is 0.687 x 10-4 m2 /s. assuming steady state in the conduit, calculate the following: a. flux of he in the conduit b. mass transfer rate of n2 in the conduit c. partial pressure of he at 0.05 m from either end
Answers: 2
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:20, yasyyas646646
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Helium and nitrogen gas are contained in a conduit 5 mm in diameter and 0.1 m long at 298 k with a u...
History, 05.05.2020 10:47
Mathematics, 05.05.2020 10:47