Engineering, 28.10.2019 22:31 gedntrxAa

Circular copper rods of diameter d=1mm and length l=25mm areused to enhance heat transfer from a surface that is maintained atts,1=100 deg. c. one end of the rod is attached tothis surface (at x=o), hile the other end (at x=25mm) is joined toa second surface that is maintained at ts,2=0deg. c. air flowing between the surfaces (and over the rods)is also at a temperature t? = 0 deg. c, and has a convectioncoefficient of h=100 w/m2kelvin.

a. what is the rate of heat transfer by convection from a singlecopper rod to air?
b. what is the total rate of heat transfer from a 1 m x 1 m section of the surface at 100 deg. c, if a bundle of the rods is installed on 4-mm centers?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, lillygrl100

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

You know the right answer?

Circular copper rods of diameter d=1mm and length l=25mm areused to enhance heat transfer from a sur...