Engineering, 28.10.2019 22:31 madisonnewby5021

Design a crank-rocker mechanism with a time ratio of q=1.3, throw angle of (δ휃휃4)푥푥 = 125 degrees and time per cycle of t = 0.5 sec, and distance between the two pivots l1 = 7 inch.. (a) use the analytical method to specify the link lengths l2, l3, l4, and the crank speed in rpm. (b) use a compass and sketch your design in the fully retracted and fully extended positions. (c) identify the imbalance angle on your drawing.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, krystabrewer3

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

You know the right answer?

Design a crank-rocker mechanism with a time ratio of q=1.3, throw angle of (δ휃휃4)푥푥 = 125 degrees an...