Engineering, 25.10.2019 21:43 baby851

Steam enters a counterflow heat exchanger operating at steady state at 0.05 mpa with a quality of 0.9 and exits at the same pressure as saturated liquid. the steam mass flow rate is 1.3 kg/min. a separate stream of air with a mass flow rate of 100 kg/min enters at 30oc and exits at 60°c. the ideal gas model with cp = 1.005 kj/kg·k can be assumed for air. kinetic and potential energy effects are negligible. determine the temperature of the entering steam, in °c. for the overall heat exchanger as the control volume, what is the rate of heat transfer, in kw.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

You know the right answer?

Steam enters a counterflow heat exchanger operating at steady state at 0.05 mpa with a quality of 0....