Engineering, 25.10.2019 20:43 GILLIG6003

How many vms can you put on a host? your boss has received the following quote for a potential virtualization server: server dell r630processor dual xeon e5-2954memory 24 x 32gb rdimmnetwork dual intel x520dp 10gb sfp+total cost $24,198.13this server will be attached to an existing iscsi san in your network. your boss wants to use this hardware to host several vms, each with 2 vcpus and 4gb ram. note: performance monitoring for the vms show an average of < 10% cpu utilization and 3gb ram utilizationyour boss wants you to research and discuss how many of these vms can be run on this hardware. why? what are the limiting factors? if faster cpus, more ram, or other components are added to this host, can you put more vms on this host?

is there a maximum number of vms you can put on this server? is there a maximum number that you should be put on this server?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 19:10, gabrielaperezcz

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

continue

You know the right answer?

How many vms can you put on a host? your boss has received the following quote for a potential virtu...