Engineering, 23.10.2019 22:00 Kazya4

It is desired to transport liquid metal through a pipe embedded in a wall at a point where the temperature is 650 k. a 1.2‐m‐thick wall constructed of a material having a thermal conductivity varying with temperature according to k = 0.0073 (1 + 0.0054 t), where t is in k and k is in w/m ⋅ k, has its inside surface maintained at 925 k. the outside surface is exposed to air at 300 k with a convective heat‐transfer coefficient of 23 w/m2 ⋅ k. how far from the hot surface should the pipe be located? what is the heat flux for the wall?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, siri5645

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

continue

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 18:10, Larkinlover703

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

continue

You know the right answer?

It is desired to transport liquid metal through a pipe embedded in a wall at a point where the tempe...