Engineering, 23.10.2019 22:00 20guadalupee73248

The fire hydrant is tested under a high standpipe pressure. the total flow of 9.8 ft3/sec is divided equally between the two outlets, each of which has a cross-sectional area of 0.031 ft2. the inlet cross-sectional area at the base is 0.57 ft2. neglect the weight of the hydrant and water within it and compute the magnitudes of the tension t, the shear v, and the bending moment m in the base of the standpipe at b. the specific weight of water is 62.4 lb/ft3. the static pressure of the water as it enters the base at b is 118 lb/in.2

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, michellerosas

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

You know the right answer?

The fire hydrant is tested under a high standpipe pressure. the total flow of 9.8 ft3/sec is divided...