subject
Engineering, 23.10.2019 20:00 jackrider1598

An ocean thermal energy conversion (otec) power plant built in hawaii in 1987 was designed to operate between the temperature limits of 86of at the ocean surface and 41 o f at a depth of 2100 ft. about 13,300 gpm of cold seawater was to be pumped from deep ocean through a 40-inch diameter pipe to serve as the cooling medium or heat sink. if the cooling water experiences a temperature rise of 6 o f and the thermal efficiency is 2.5 percent, determine the amount of power generated. take the density of seawater to be 64 lbm/ft3 .

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, ayoismeisjjjjuan
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
image
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
image
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
An ocean thermal energy conversion (otec) power plant built in hawaii in 1987 was designed to operat...

Questions in other subjects:

Konu
Mathematics, 20.02.2020 18:07