subject
Engineering, 19.10.2019 00:30 Fangflora3

An insurance company has hired you as a consultant to improve their understanding of burn injuries. they are especially interested in injuries induced when a portion of a worker? s body comes into contact with machinery that is at elevated temperatures in the range of 50 to 100 degree c. their medical consultant informs them that irreversible thermal injury (cell death) will occur in any living tissue that is maintained at t > or = to 48 degree c for a duration of delta t > or = to 10 s. they want information concerning the extent of irreversible tissue damage (as measured by distance from the skin surface) as a function of the machinery temperature and the time during which contact is made between the skin and the machinery. assume that living tissue has a normal temperature of 37 degree c is isotropic and has constant properties equivalent to those of liquid water. to assess the seriousness of the problem, compute locations in the tissue at which the temperature will reach 48 degree c after 10 s of exposure to machinery at 50 degree c and 100 degree c.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 08:10, doggo242
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
An insurance company has hired you as a consultant to improve their understanding of burn injuries....

Questions in other subjects:

Konu
Mathematics, 16.10.2020 07:01
Konu
Chemistry, 16.10.2020 07:01
Konu
Mathematics, 16.10.2020 07:01