Engineering, 18.10.2019 22:30 Brainly264

Using the parity equations from question 4, calculate parity bits p1, p2, and p4 for the received code ‘10110110’ and determine which bit needs to be corrected. the bit order is {p1, p2, d1, p4, d2, d3, d4, ded}. 10 pts. hint: the failing bit can be determined by doing an exclusive or of the received parity and the calculated parity bits. for example, if the received parity for p4, p2, p1 is 0,0,1 and the calculated parity for p4, p2, p1 is 0,1,0, then a bit by bit xor would result in 0,1,1. converting 011 to decimal would be 3, indicating that the bit in position 3 needs to be corrected

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Engineering, 04.07.2019 18:20, xcapo1x

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

continue

Engineering, 04.07.2019 19:10, LadyHolmes67

Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false

Answers: 3

continue

Engineering, 04.07.2019 19:10, justkevin1231

Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view

Answers: 2

continue

You know the right answer?

Using the parity equations from question 4, calculate parity bits p1, p2, and p4 for the received co...