Engineering, 18.10.2019 20:30 artiomtyler007

Alarge (w > > a) plate sample containing an edge (surface) crack with an initial length of 0.010mm is subjected to two sets of uniaxial cyclic (sinusoidal) fatigue loading. the first set of cyclic loading varies between +25 and +125 mpa for 350,000 cycles. the second set of loading varies between +250 and ‐250 mpa. assume the material has a plane strain fracture toughness of 25 mpa m 1/2 and paris law material constants n= 3.1 and c = 1.8x10‐10 for the units given here.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 19:10, netflixacc0107

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

continue

Engineering, 04.07.2019 19:10, nbunny7208

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

continue

You know the right answer?

Alarge (w > > a) plate sample containing an edge (surface) crack with an initial length of 0....