Engineering, 17.10.2019 00:30 zachthomas024

Standards for firewalls may be based on their thermal response to a prescribed radiant heat flux. consider a 0.25-m-thick concrete wall (rho= 2300 kg/m3, c= 880 j/kg·k, k= 1.4 w/m·k), which is at an initial temperature of ti= 25°c and irradiated at one surface by lamps that provide a uniform heat flux of qs′′= 0.85·104 w/m2. the absorptivity of the surface to the irradiation is αs= 1.0. if building code requirements dictate that the temperatures of the irradiated and back surfaces must not exceed 325°c and 25°c, respectively, after 30 min of heating, will the requirements b

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, siri5645

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

You know the right answer?

Standards for firewalls may be based on their thermal response to a prescribed radiant heat flux. co...