Engineering, 16.10.2019 16:10 jaymariepope3334

Strains are measured on the surface of a brass alloy part as follows: εxx = 1600 10−6, εyy = 1300 10−6, and γxy = 1500 10−6×××estimate the in-plane stresses σxx, σyy, and τxy, and also the strain εzz normal to the surface. (assume that the gages were bonded to the metal when there was no load on the part, that there is no yielding, and that no loading is applied directly to the surface, i. e., σzz= τyz= τzx= 0).

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Engineering, 04.07.2019 19:10, Lexi5170

A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b. s. and b. s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.

Answers: 3

continue

You know the right answer?

Strains are measured on the surface of a brass alloy part as follows: εxx = 1600 10−6, εyy = 1300 1...