Engineering, 15.10.2019 22:30 OnlyWunTasi

Adoor closing mechanism, like the one we studied in homework 4, can be represented as a simple second-order system as follows: jθ" + bθ' + kθ = twhere j is the door inertia about the hinges, b is the damping coefficient in the closing damper, and k is the spring stiffness in the closing spring. θ is the angle of door opening, and t is the applied torque when the door is pushed open. write down the transfer function that relates the input torque t to the output angle θ.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

Engineering, 04.07.2019 19:10, nhester3401

Agas is compressed from vi 0.3 m, p 1 bar to of v2 0.1 m3, p2--3 bar. pressure and volume are related linearly during the process. for the gas, find the work, in kj.

Answers: 2

continue

You know the right answer?

Adoor closing mechanism, like the one we studied in homework 4, can be represented as a simple secon...