Engineering, 15.10.2019 18:30 jayjinks976
Refrigerant-134a at 1 mpa and 90°c is to be cooled to 1 mpa and 30°c in a condenser by air. the air enters at 100 kpa and 27°c with a volume flow rate of 640 m3/min and leaves at 95 kpa and 60°c. determine the mass flow rate of the refrigerant. the gas constant of air is 0.287 kpa·m3/kg·k. the constant pressure specific heat of air is cp = 1.005 kj/kg·°c. the enthalpies of the r-134a at the inlet and the exit states are 324.66 kj/kg and 93.58 kj/kg.
Answers: 3
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:20, sanchez626
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
Engineering, 04.07.2019 19:10, justkevin1231
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
Engineering, 04.07.2019 19:10, kelseiroll9759
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
Refrigerant-134a at 1 mpa and 90°c is to be cooled to 1 mpa and 30°c in a condenser by air. the air...
History, 15.10.2019 16:10
English, 15.10.2019 16:10
Mathematics, 15.10.2019 16:10
Mathematics, 15.10.2019 16:10
Health, 15.10.2019 16:10