Engineering, 15.10.2019 05:00 coreycbg1127

Adrillstring is composed of 9000 ft of 5-in. 19.5-lbm/ft drillpipe and 1000 ft of drill collars having a 8.0-in. od, 3.0-in. id. compute: a) capacity of the drillpipe in barrels. b) capacity of the drill collars in barrels. c) number of pump cycles required to pump surface mud to the bit. the pump is a duplex double acting pump with 6-in. liners, 2.5-in. rods, 16-in. strokes, and operates at a volumetric efficiency of 85%. d) displacement of the drillpipe in bbl/ft. e) displacement of the drill collars in bbl/ft. the od of the collars is 8.0-in

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:10, oshawn108

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k

Answers: 2

continue

Engineering, 04.07.2019 19:10, pjgolden04

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

continue

You know the right answer?

Adrillstring is composed of 9000 ft of 5-in. 19.5-lbm/ft drillpipe and 1000 ft of drill collars havi...