Engineering, 14.10.2019 21:00 rebekahlm

Two very large tanks, maintained at 323 k and 1 atm total system pressure, are connected by 0.1 m diameter circular duct, which is 5 min length. tank no. 1 contains a uniform gas mixture of 60 mol% acetone and 40 mol % air, whereas tank no. 2 contains a uniform gas mixture of 10 mol% acetone and 90 mol% air. determine the initial rate of acetone transfer between the two tanks. list the reason(s) why this process is considered "pseudo steady state"

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

You know the right answer?

Two very large tanks, maintained at 323 k and 1 atm total system pressure, are connected by 0.1 m di...