subject
Engineering, 13.10.2019 17:30 miamassimino

Risk assessment

section 1

produce a short report on how to undertake a risk assessment. (1000 words, must include references, text and images)

section 2

undertake a risk assessment using the following information for the work item described.
•part of the roadway outside the construction site has become damaged by the excavation lorries. it requires to be repaired in order to prevent the closure of that entrance onto the site by the local authority highways department.

•an emergency repair is proposed with quick setting concrete, but the roadway will require closure for 12 hours during this work.

•the work will be undertaken using a wheeled excavator, two ground-workers, a floor saw and three bags of quick setting concrete, along with a traffic lights control, cones and ensure that you follow the 'five steps to risk assessment')

section 3

justify the contents of a risk assessment you carried out in section 2, include you're justification for decisions made in terms of the consequences of risk, based on a clear definition of what is meant by reasonably practicable'. (500 words)

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
image
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
image
Engineering, 04.07.2019 18:20, CelesteN64
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
image
Engineering, 04.07.2019 18:20, 3076850
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i. e., a violation of one statement leads to the violatio the other statement)
Answers: 2
You know the right answer?
Risk assessment

section 1

produce a short report on how to undertake a ris...

Questions in other subjects:

Konu
English, 02.09.2019 08:00
Konu
History, 02.09.2019 08:00