Engineering, 11.10.2019 06:00 jstyopin

Atwin-cylinder two-stroke engine has a swept volume of 150 cm^3. the maximum power output is 19 kw at 11 000 rpm. at this condition the bsfc is 0.11 kg/mj, and the gravimetric air/fuel ratio is 12: 1. if ambient test conditions were 10°c and 1.03 bar, and the fuel has a calorific value of 44 mj/kg, calculate the bmep, the arbitrary overall efficiency and the volumetric efficiency.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, samanthabutryn

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

continue

You know the right answer?

Atwin-cylinder two-stroke engine has a swept volume of 150 cm^3. the maximum power output is 19 kw a...