Engineering, 09.10.2019 22:20 HelenKellerwasaSlutt

The following test data were taken on a 5.5 kw, four-pole, 220-v, 50-hz, y-connected im having a rated current of 28 a. dc test: vdc = 13.6 v idc = 28.0 a no-load test: vl = 208 v f = 50 hz i = 8.17 a pin = 420 w locked-rotor test: vl = 25 v f = 15 hz i = 27.9 a pin = 920 w (a) determine the per-phase equivalent circuit of this motor. 4 marks (b) if the motor runs at 1425 rpm, calculate the input current drawn using the equivalent circuit parameters. 4 marks (c) solve the equivalent circuit and plot power input, input current, power output, toque, power factor as a function of speed (slip). draw the torque versus speed characteristics of the motor.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:20, CelesteN64

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

Engineering, 06.07.2019 03:10, kturvey225

Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window

Answers: 3

continue

You know the right answer?

The following test data were taken on a 5.5 kw, four-pole, 220-v, 50-hz, y-connected im having a rat...