subject
Engineering, 07.10.2019 23:30 Ashtree519

Atank initially contains 120 l of pure watera tank originally contains 100 gal of fresh water. then water containing 1 2 lb of salt per gallon is poured into the tank at a rate of 2 gal/min, and the mixture is allowed to leave at the same rate. after 10 min the process is stopped, and fresh water is poured into the tank at a rate of 2 gal/min, with the mixture again leaving at the same rate. find the amount of salt in the tank at the end of an additional 10 min. a mixture containing a concentration of γ g/l of salt enters the tank at a rate of 2 l/min, and the well-stirred mixture leaves the tank at the same rate. find an expression in terms of γ for the amount of salt in the tank at any time t. also find the limiting amount of salt in the tank as t → [infinity]

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
image
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
image
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
image
Engineering, 04.07.2019 18:10, krystabrewer3
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
You know the right answer?
Atank initially contains 120 l of pure watera tank originally contains 100 gal of fresh water. then...

Questions in other subjects:

Konu
Mathematics, 19.04.2021 05:00
Konu
Mathematics, 19.04.2021 05:00
Konu
Mathematics, 19.04.2021 05:00
Konu
Arts, 19.04.2021 05:00