Engineering, 07.10.2019 20:30 wendii87wh
Athin-walled hoop of mass m and radius r starts from rest and rolls down an incline at an angle of θ. the static friction coefficient is assume the hoop rolls without slipping or bouncing. determine the acceleration of the center of mass, ag, and the angular acceleration α. be sure to draw a complete fbd. your answer should be in terms of the variables given in the problem statement. solve using: a. the moment equation about the mass center g. b. the moment equation about the contact point p. c. determine the frictional condition required for the hoop to roll without slipping. d. determine the equivalent mass of the system. e. determine the equivalent mass moment of inertia of the system
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:20, kendrawalraven
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
Athin-walled hoop of mass m and radius r starts from rest and rolls down an incline at an angle of θ...
Questions in other subjects:
Biology, 10.10.2019 20:00
Chemistry, 10.10.2019 20:00
