Engineering, 06.10.2019 08:00 vkrizh
A1045 hot-rolled steel tension test specimen has a diameter of 5.75 mm and a gage length of 29 mm. in a test to fracture, the stress and strain data below were obtained. determine(a) the modulus of elasticity.(b) the proportional limit.(c) the ultimate strength.(d) the yield strength (0.05% ) the yield strength (0.20% ) the fracture stress.(g) the true fracture stress if the final diameter of the specimen at the location of the fracture was 4.28 mm. load change in length load change in length(kn) (mm) (kn) (mm)0.00 0.00 10.34 0.292.33 0.01 12.14 0.614.66 0.02 14.18 1.046.98 0.03 16.67 1.809.31 0.04 17.49 2.269.67 0.05 17.80 2.789.96 0.06 17.37 2.7810.28 0.08 16.42 3.8310.34 0.09 16.12 3.9410.34 0.10 15.94 4.0010.34 0.14 15.76 4.0610.34 0.17 15.56 4.12 15.43 fracture
Answers: 1
Engineering, 04.07.2019 18:10, heidiburgos1own6c0
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10, mamasbug4285
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
A1045 hot-rolled steel tension test specimen has a diameter of 5.75 mm and a gage length of 29 mm. i...
Mathematics, 25.01.2021 21:50
Health, 25.01.2021 21:50
History, 25.01.2021 21:50
Physics, 25.01.2021 21:50
English, 25.01.2021 21:50
English, 25.01.2021 21:50