subject
Engineering, 06.10.2019 04:30 lindsayb2000

Problem 4.70 6 of 10 review | constants an automobile battery, when connected to a car radio, provides 12.72 v to the radio. when connected to a set of headlights, it provides 12 v to the headlights. assume the radio can be modeled as a 6.54 ω resistor and the headlights can be modeled as a 0.4 ω resistor. part a what is the thévenin equivalent voltage for the battery? express your answer to three significant figures and include the appropriate units. vthv t h = nothing nothing request answer part b what is the thévenin equivalent resistance for the battery? express your answer to three significant figures and include the appropriate units. rthr t h = nothing nothing request answer part c what is the norton equivalent current for the battery? express your answer to three significant figures and include the appropriate units. ini n = nothing nothing request answer part d what is the norton equivalent resistance for the battery? express your answer to three significant figures and include the appropriate units.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
image
Engineering, 04.07.2019 18:10, mamasbug4285
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
image
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
image
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Problem 4.70 6 of 10 review | constants an automobile battery, when connected to a car radio, provid...

Questions in other subjects:

Konu
Social Studies, 30.06.2019 09:10