subject
Engineering, 06.10.2019 01:30 nkidane2802

Seawater containing 3.50 wt% salt passes through a series of 10 evaporators. roughly equal quantities of water are vaporized in each of the 10 units and then condensed and combined to obtain a product stream of fresh water. the brine leaving each evaporator but the tenth is fed to the next evaporator. the brine leaving the tenth evaporator contains 5.00 wt% salt.(a) draw a flowchart of the process showing the first, fourth, and tenth evaporators. label all the streams entering and leaving these three evaporators.(b) write in order the set of equations you would solve to determine the fractional yield of fresh water from the process (kg h2o recovered/kg h2o in process feed) and the weight percent of salt in the solution leaving the fourth evaporator. each equation you write should contain no more than one previously undetermined variable. in each equation, circle the variable for which you would solve. do not do the calculations.(c) solve the equations derived in part (b) for the two specified quantities.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
image
Engineering, 04.07.2019 18:10, genyjoannerubiera
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
image
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
image
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
Seawater containing 3.50 wt% salt passes through a series of 10 evaporators. roughly equal quantitie...

Questions in other subjects:

Konu
Social Studies, 22.03.2021 21:40
Konu
Mathematics, 22.03.2021 21:40