subject
Engineering, 05.10.2019 14:30 Ladyt916

The drag of an oceanographic research submarine 9 m mated from wind tunnel tests with a scale model of length 1.5 m and wet- ted surface area 1.2 m2. the measured drag force in the wind tunnel is 7.9 n at a wind speed of 30 m/s and air temperature of 25°c. if the full-scale |submarine is deeply submerged in salt water at 15°c, at what speed can its drag be most accurately predicted? what is the best estimate of its drag at a speed of 2 m/s? can this estimate be refined by raising long is to be esti- lowering the or temperature in the wind tunnel?

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 19:30, 10040813
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
image
Engineering, 04.07.2019 18:10, jadeochoa4466
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
image
Engineering, 04.07.2019 18:10, juansoto227711
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
image
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
The drag of an oceanographic research submarine 9 m mated from wind tunnel tests with a scale model...

Questions in other subjects:

Konu
Mathematics, 06.05.2020 08:24