subject
Engineering, 05.10.2019 13:30 omarabady

Acomposite wall consists of a 10-cm-thick layer of building brick of thermal conductivity k = 0.7 w/(m • °c) and 3-cm-thick plaster of thermal conductivity k = 0.5 w/(m • °c). an insulating material of thermal conductivity k = 0.08 is to be added to reduce the heat transfer through the wall by 70 percent. determine the thickness of the insulating layer.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
image
Engineering, 04.07.2019 18:10, colin774
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
Acomposite wall consists of a 10-cm-thick layer of building brick of thermal conductivity k = 0.7 w/...

Questions in other subjects:

Konu
Chemistry, 18.11.2020 01:50