Engineering, 05.10.2019 10:01 bwelsh880
10 kg piece of aluminum, initially at 300 k, is melted and used in the casting process. the heating and melting process is divided into two steps. in the first step the piece of aluminum is heated by hot air at 400˚c until its temperature rises to 600 k. then in the second step its temperature increases to 900 k by heating by hot exhaust gas at 1400 k. find the entropy generated in this process. properties of aluminum are the following: density and specific heat of liquid and solid phase: 2700 kg/m3 and 1040 j/kg, latent heat of fusion 321 kj/kg and melting temperature 883 k.
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20, samantha636
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 18:20, rocio5649
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa. s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
You know the right answer?
10 kg piece of aluminum, initially at 300 k, is melted and used in the casting process. the heating...
Questions in other subjects:
