Engineering, 02.10.2019 18:30 nosleepbrooklyn2006

Identical wire loops are dipped into liquid a and liquid b, so that a film of liquid forms across the loops (like the bubble solution on a child's bubble blowing wand). the width of each loop is increased slowly and the forces fa and fb needed to make the loops 5% wider are measured.

(a) fa will be greater than fb

(b) fa will be less than fb

(c) fa will be equal to fb

(d) it is impossible to predict whether fa or fb will be greater without more information.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

You know the right answer?

Identical wire loops are dipped into liquid a and liquid b, so that a film of liquid forms across th...