Engineering, 01.10.2019 18:30 coolgirl10020031

Nitrogen is stored in a tank at a pressure of 20 bar and 300 k. the tank has a capacity of 2.0 m3. gas is allowed to escape through a partially opened valve until the pressure reaches 2 bar. treat nitrogen gas as an ideal gas with a constant heat capacity of cp = 29.3 j/(mol k). consider two di erent assumptions about the relative rates of mass and heat exchange: (a) adiabatic: the process occurs suciently rapidly that there is negligible heat ow between the gas in the tank and its surroundings. (b) isothermal: gas leaks out of the tank so slowly that the temperature in the tank remains at 300 throughout the process, due to heat exchange with the surroundings.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 19:10, rhiannpelham60

The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false

Answers: 2

continue

Engineering, 04.07.2019 19:10, 592400014353

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

continue

You know the right answer?

Nitrogen is stored in a tank at a pressure of 20 bar and 300 k. the tank has a capacity of 2.0 m3. g...