Engineering, 01.10.2019 19:00 julielebo8
In the commercial production of sugar (sucrose), the product crystals are washed and centrifuged to partial dryness. the crystals are then sent through a rotary dryer where they are contacted with a hot stream of air that reduces the moisture content from 1: 0wt% to 0: 1wt%. the ratio of wet sugar to inlet air fed to the dryer is 3.3 kg wet sugar/kg inlet air. the inlet air contains 1.5 mole% water. (a) draw and label the flowchart and do the degree-of-freedom analysis. (b) taking a basis of 100 kg of wet sugar fed to the dryer, calculate the mass of water and its mole er fraction in the air leaving the dryer
Answers: 1
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:20, 1230bering
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
In the commercial production of sugar (sucrose), the product crystals are washed and centrifuged to...